It's the brains behind your generator system. The automatic transfer switch (ATS) continuously monitors the power coming from your utility. When the power goes out, the ATS automatically transfers power from the utility to your generator. When utility power is restored, the ATS turns off your generator and transfers back to power from the utility grid.

  • Automatically transfers power to your generator during an outage


  • Designed for use only with KOHLER generators equipped with RDC2 or DC2 controls.

  • Installs indoors or outdoors.

  • Available in service-entrance models.

  • Optional external LED display.

  • Corrosion-resistant aluminum enclosure.

  • 5-year, 2000-hour limited warranty.

  • 200-amp models available

  • Volts: 240 V (single-phase).

  • Poles: 2 (single-phase).

Kohler RXT 200 Amp Automatic Transfer Switch Service Rated Nema 3R | RXT-JFNC-20

  • Amps 200
    Phase Single Phase
    Voltage 240
    Frequency 60 Hz
    Wires 3
    Poles 2
    Transfer Switch Type Standard
    Load Center w/o Load Center
    Generator Compatibility All single-phase KOHLER Generators with RDC2 or DC2 controllers
    Load shedding Includes Load Shedding Capability
    Load Control Time Delay Yes
    Enclosure Material Aluminum
    Enclosure Type Indoor or Outdoor
    Certifications/Listings UL Listed
    Controller RDC2/DC2 
    Position indicating LEDs Optional
    Source available indicating LEDs Optional
    Accessory board with audible alarm, input and output connections, 2-week exercise option, and 10 minute load control delay option No
    External alarm module available for remote status indication and remote generator set start/stop No
    Common / fault relay No
    All-in-one main distribution panel and ATS No
    Weight 15 lbs. (7 kg)
    Dimensions (L x W x H in.) 623 mm x 335 mm x 180 mm (24.5 in. x 13.2 in. x 7.1 in.)
    Warranty 5-year limited
    Country of Origin US

Copyright 2018 Fisher Electric LLC          Website Designed By Fisher Electric LLC